MDI GDS For Vauxhall OPEL GM Mutiple Diagnostic Interface Without WIFI Card and Software
Reasons of buy MDI GDS
Support wifi function.(You need buy WIFI card yourself)
Best GM MDI tool, can test most GM car from 1990-2014.
Support Multi-language: English, French, German, Japanese, Italian and so on. Total 30 languages to choose.
Support online program or coding.
Notice of buy this Item
When you test after 2010 year gm car, use GM gds2 software. When test GM car before 2010 year, you can use the techwin software, it will run fast and stable:
This one can only be installed on Win XP system you can use USB Cable or Lan Cable to connect it with your laptop.
For online program,we don't have ID and password, you need buy it yourself.
MDI is an interface between the vehicle DLC and a PC (by wired USB, wired Ethernet, wireless Ethernet ) and TIS2web.
Can be Used for SPS programming on existing and future SGM vehicles
Required for diagnostics on new SGM Global A Electrical Architecture Vehicles
Used with TIS2Web, GM Global Diagnostics System (GDS), SPS and MDI Manager Software
GM Multiple Diagnostic Interface (MDI)
All current and most legacy vehicle protocols: UART, KW2000, CLASS2, GM LAN, etc.
Supports Service Programming System (SPS)
Passthrough progrmming on past model and Global A vehicles
Supports PC-Based diagnostics with rollout of the Global Diagnositc System (GDS) application
Includes Flight Recorder Mode
Features of MDI GDS for GM:
With opel Global tis global diagnostic system
Support offline lease function
Support Opel offline programming function
With GDS2 diagnostic system
Tech2 win diagnostic software support adding latest software
support programming online
support cable communication
support wireless communication
support original factory latest software
With European Chevetl Global tis, Supports European Chevetl offline programming
All Chip in mainboard are new and original
New Diagnostic Application Software required for Global A Vehicles
Global Diagnostic System (GDS)
PC-based software diagnsotics
DTCs, Diagnostics, Data Display & Visualization, Device Controls, Special Tests, Flight Recorder management, etc.
GDS is software which runs on a specific PC. Updates received via TIS2Web.
Multiple display options. More space for diagnsotics. Session management for multiple us.avif?
The new GM MDI can be used only in the Pass-Thru method. This means you can use it as your programming tool, while your Tech 2/CANdi remains available for diagnostics and other duties.
The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future.
The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. Regulations require programming procedures to be compliant with SAE Recommended Practice J2534.
The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
What protocols does the GM MDI support?
For immediate use — At present, vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the Tech 2:
- UART
- Class 2
- KWP2000
- GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles.)
Tech2 win diagnostic software support adding latest software
support programming online
support cable communication
support wireless communication
support original factory latest software
With European Chevetl Global tis, Supports European Chevetl offline programming
All Chip in mainboard are new and original
New Diagnostic Application Software required for Global A Vehicles
Global Diagnostic System (GDS)
PC-based software diagnsotics
DTCs, Diagnostics, Data Display & Visualization, Device Controls, Special Tests, Flight Recorder management, etc.
GDS is software which runs on a specific PC. Updates received via TIS2Web.
Multiple display options. More space for diagnsotics. Session management for multiple us.
How to Use GM MDI?
The new GM MDI can be used only in the Pass-Thru method. This means you can use it as your programming tool, while your Tech 2/CANdi remains available for diagnostics and other duties.
The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future.
The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. Regulations require programming procedures to be compliant with SAE Recommended Practice J2534.
The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
What protocols does the GM MDI support?
For immediate use — At present, vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the Tech 2:
- UART
- Class 2
- KWP2000
- GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles.)
US$9.90
US$122.55
US$298.00
US$10.90
US$129.00
US$298.00
US$109.00
US$29.90
US$679.00
US$48.90
US$450.00
US$4,650.00
US$386.00
US$9.99
US$49.58
US$40.00
US$1,899.00
US$99.00
US$132.00
US$31.90
US$13.90
US$79.00
US$159.00
US$439.00
