Description
Tactrix Openport 2.0 + ECUFLASH Cable J2534 for Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru etc
Highlights:
1. The OpenPort 2.0+ combined with our EcuFlash software.
The OpenPort 2.0+ is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.
2. New full chip new module plan, fast high speed transfer and very stable function.
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4. Field upgradable software
5. Tactrix Openport 2.0 was excellently tested with Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru
6. The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software.
(We don't provide software and after-sale service support if you use other third-party software)
7. Tactrix Openport 2.0 is compatible work with PCMtuner Dongle.
Warm Notice:
● There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!
● The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!
● A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.
● CD will maybe easily broken in shipping way, so if CD can't be readable, please contact us to get a free download link
● Computer System Requirement: Windows XP/Win 7 32bits---CD Software request
● DO Not connect the Internet when you use it otherwise device will cause device damage.
● Close anti-virus programmer when run software.
Tactrix Openport 2.0+ECUFLASH Specifications:
1. 72Mhz 32-bit processor
2. USB 2.0 full speed device (USB-A/Mini cable included)
3. J2534 PassThru support with Windows DLL
4. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
5. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
6. RGB status LEDs
For ECU flash you can get info from this list:
Package includes:
10pcs x Tactrix Openport 2.0+ECUFLASH Cable
Highlights:
1. The OpenPort 2.0+ combined with our EcuFlash software.
The OpenPort 2.0+ is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.
2. New full chip new module plan, fast high speed transfer and very stable function.
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4. Field upgradable software
5. Tactrix Openport 2.0 was excellently tested with Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru
6. The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software.
(We don't provide software and after-sale service support if you use other third-party software)
7. Tactrix Openport 2.0 is compatible work with PCMtuner Dongle.
Warm Notice:
● There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!
● The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!
● A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.
● CD will maybe easily broken in shipping way, so if CD can't be readable, please contact us to get a free download link
● Computer System Requirement: Windows XP/Win 7 32bits---CD Software request
● DO Not connect the Internet when you use it otherwise device will cause device damage.
● Close anti-virus programmer when run software.
Tactrix Openport 2.0+ECUFLASH Specifications:
1. 72Mhz 32-bit processor
2. USB 2.0 full speed device (USB-A/Mini cable included)
3. J2534 PassThru support with Windows DLL
4. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
5. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
6. RGB status LEDs
For ECU flash you can get info from this list:
US Domestic Market Vehicles currently supported by EcuFlash | ||||
Make | Model | Year(s) | Compatible OpenPort Interfaces | Init Connector Needed? |
Subaru | Impreza WRX | 2001-2002 | 1.2 1.3S 1.3U 2.0 | 2001-2002 |
2003-2005 | 1.2 1.3S 1.3U 2.0 | 2003-2005 | ||
2006-2007 | 1.2 1.3S 1.3M 2.0 | |||
2008-2009 | 2.0 | |||
Impreza STi | 2004-2007 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2008-2009 | 2.0 | |||
Impreza 2.5RS | 2005 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
Impreza 2.5i | 2005-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Forester 2.5 | 2005-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Forester XT | 2004-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Tribeca | 2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Legacy / Outback 2.5i / 3.0r | 2005-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Legacy GT / Outback XT | 2004-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
2007-2009 | 2.0 | |||
Baja | 2004-2006 | 1.2 1.3S 1.3M 1.3U 2.0 | ||
Mitsubishi | Evo 5 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | |
Evo 6 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | ||
Evo 7 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | ||
Evo 8 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | ||
Evo 9 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | ||
Evo 10 | 2.0 | |||
(all 2nd Gen) | 1996-???? | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | |
Eclipse GS/GT | 2001-2003 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) | |
Lancer OZ | 2002-2004 | 1.3M 1.3U 2.0 | Mitsu (for 2.0 only) |
Package includes:
10pcs x Tactrix Openport 2.0+ECUFLASH Cable
Previous: Main Unit of Orange5 Super Pro V1.35 Programming Tool and USB Dongle Without Adapters
Next: Autel APB112 Smart Key Simulator Main Unit and USB Cable Set for IM608 IM508
Recommend Items
- US$359.00
- US$32.90
- US$9.80
- US$149.00
- US$89.00
- US$16.90
- US$370.00
- US$219.00
- US$149.00
- US$49.90
- US$32.99
- US$129.00
Special Items
- US$179.00
- US$79.90
- US$1,049.00
- US$16.99
- US$54.99
- US$829.00
- US$61.74
- US$5.99
- US$190.00
- US$28.49
- US$36.00
- US$16.14