2024 Autel MaxiPRO MP900E Scanner Support CAN-FD DoIP, ECU Coding, Bi-Directional, 40+ Services, Android 11,FCA SGW, Newer of MP808S MP808BT PRO

Autel MaxiPRO MP900E Scanner

Autel 2024 newly-launched MaxiPro MP900 is designed to reinvent the concept of what a scan tool should do for a technician, featuring an OE-level software platform that economizes the modern technician’s time while delivering accuracy of identifying. It will bring you the confidence to repair any car faults you would meet.



Highlights:

[Advanced ECU Coding] Operate with a menu-guided procedure to flash, calibration, rematch, recode, reset, relearn, etc. NO time-consuming process.
[40+ Common Service Functions] Cover almost all basic, special, and many advanced functions that can handle 99% of daily car maintenance in busy workshops.
[All System Diagnostics] Scan all available on-board ECUs & modules, directly get to the fix and eliminate guesswork.
[Active Tests] Bi-directional control of relays, injectors, coils, solenoids, valves, actuators, etc. for testing without manual control; deliver fast results in 5 minutes.
[99% Worldwide Car Coverage] Provide the latest OE-level coverage for 10,000+ models from US domestic, Asian, and European, including supercars.
[Fresh Hidden Features] Open and close the features that have been set up by the manufacturer. Customize car features to personalize your car.
[DoIP & CAN-FD Protocol] Compatible with new protocols to support the vehicles of today and tomorrow. There is no need to buy specialized adaptors. See compatible car list on page.
[Smart AutoVIN & Scan] 3X faster AutoVIN recognition for quick vehicle identification; builds all system communication and detects system malfunction in seconds.
[Guided Functions] Easy-to-follow instructions take you from initial procedure to successful diagnostic access to VAG group & ManLD vehicles.
[Autel Cloud-based Report] Report Management can view, save, print, and share reports on phones, tablets, and computer browsers.
[Expand Features] Thorough battery testing with BT506; Endoscope with MV105S.
[One year Software Update] Keep upgrading for more supported cars and more features; subscription-free for 1 year.
[Superior combination of hardware & software] Androcid 11.0 Operating System + 1280*800 Touchscreen + 4G 64G ROM & RAM + 7700mAh Battery



Superior Combination of Hardware & Software

[Android 11.0 Operating System] Autel MP900E incorporates this U.S. most-popular operating system, previously only be seen in flagship scan tools. You can launch apps 20% faster than before.
[4-Core, 1.8GHz Processor] You can experience 5X faster task scheduling and improved system fluency. Its lower power consumption can effectively improve battery life.
[8”, 1280*800 Touchscreen] It is highly responsive to your input, and will show all the test results, diagnostic data clearly even in poor conditions.
[4G+64G ROM & RAM] Thanks to the massive internal memory, you can keep all of your client’s info, and have an easy time diagnosing their vehicles every time they visit. Also, you add more files for future use.
[7700mAh Battery] Unlike other diagnostic tools which have a problem with the battery life, you will enjoy up to 12 hours of uninterrupted operation.
[Rear 8MP Camera] The powerful 8-megapixel rear camera equipped with autofocusing capabilities and flashlight will help you get crystal clear shots.
[NEW! Screen Cast] You can project this Autel scanner's screen onto another device, display and share the scanner's interface and data in real-time on a larger screen such as a computer.



1 Year Software Update Included in Package

The most groundbreaking about the Autel MP900E is its staying up-to-date with the unpredictable market. The updates are subscription-free for 1 year, which include:

[Adding More Vehicles & Functions to Compatibility List] This greatly increases the value of your investment as you don’t need to make extra purchases to power up your business.
[Fixing Software Bugs & Errors] To solve some software issues through updates or patches, ensuring this diagnostic tool functions correctly without any errors.
[Don’t Need to Update for Continuous Use] Unlike Snap-On or Bosch scan tools, this Autel scanner won't have to update for its continuous use once the 1 year subscription-free updating period has expired.

ECU Coding: Solutions of Complex ECU Repairs

Autel MaxiPRO MP900E features the advanced ECU coding that is usually seen on Autel’s over 1000-bucks value diagnostic scanners. With it, you can address the following issues:
Recognize new CPU replacement to make it match the current settings of your vehicle.
Make adaptive data for specific components after repairs are made, providing ways to solve major car issues.
Make the car customized to your own tastes (Personalization, Fresh Hidden Functions). The applications could be: recode your lighting setting, which includes changing the brightness levels or even the indicator flashing intervals; set optical or acoustic signals on the vehicle and different warning signals, such as a Seat belt reminder. In addition, close some functions that you probably won't need like the auto star-t & sto-p system.



There are 2 operating options tailored to your specific needs:

[Online Coding] Autel online servers will send coding values in automatic for a quick and precise procedure. This was developed as a smart coding solution that can be used by any technician or shop regardless of experience.
Compatible with Nissan, Infiniti, NissanGT-R, Renault, Hyundai, Kia, V-W, V-W_Brazil, BM.W, MINI, Peugeot, Citroen, DS_EU, Porsche, SGMW …
[Offline Coding] You can manually input coding values for more customized builds.
Compatible with Infiniti, NissanGT-R, Toyota, Lexus, Scion, Daihatsu, Be.nz, Maybach, LandRover, Jaguar, Subaru, Fo.rd, Fo.rd-AU, Fo.rd-EU, Mazda, Hyundai, Kia, Chrysler, Au.di, V-W, Skoda, V.W_Brazil, Bentley, Bugatti, Lamborghini, LT3, Seat, V.W_CV, Man_LD, Peugeot, Citroen, DS_EU, Opel, Vauxhall, Porsche, Mitsubishi …
[REMINDER] Available coding operations vary by the test vehicle. ONLY the available operations will display in the menu.



Bi-directional Active Test: Troubleshooting in A Blink

Autel MP900E is a fully-featured bidirectional scan tool. This means you can send the command to the ECU and receive a response without using the vehicle’s control. It will save you loads of repair time without tearing the vehicle part to pinpoint the fault areas.

The applications may include: EVAP Test / VTEC Test / ETCS (TAC) Test / Radiator FAN / A/C Clutch / Flue Pump ON/OFF / All Injectors Stop / One Injector Stop / Cruise Control Cancel History / VTC Test / Cylinder Cranking Speed Variation Test / Idle Stop Starter Counter Check / Cylinder AF Test / DI Fuel Pressure Test / Activation A/C Compressor / EGR cooler pump / EGR cooler switch-over value / EGR vacuum regulator Solen.val. / Exhaust turbocharger 1 / Fan 1 control circuit / Fuel pump electronics / Glow time control module 1 / Relay for reserve coolant pump / Throttle valve control unit.

[REMINDER] The options programmed into the vehicle will determine the range of options available.



40+ HOT Service Functions: Daily Repairs Never Be So Easier

This one-station automotive scanner has pretty much every reset and relearn services packed in one unit. With a single touch, you can reset all kinds of dashboard lights from TPMS to airbags, and make accurate adaptations. The following are the typical servicer functions you would use every day:
[Oil Reset] Reset oil maintenance minder system, program oil life change intervals.
[BMS Reset] Evaluate the battery charge state, and register the new battery replacement.
[ABS Bleeding] Help remove the trapped air for the brake system.
[D-P-F Regeneration] Get rid of stored soot and even find faults in the D-P-F system.
[Brake Reset] Reset the brake pad after the replacement.
[TPMS Reset] Reset tire pressure and turn off the tire pressure MIL.
[Throttle Adaptation] Make initial settings to throttle actuators so you’ll have smooth driving.
[SAS Reset] Erase the record of the old steering angle sensor and overwrite it with a new one.
AND MORE.

In addition to the common services mentioned above, to meet the growing market demands, Autel MP900E innovatively put 2023-new functions into options to better address market needs:

[AC System Relearn/Initialization] Initialize the AC system after replacement or unit suffers memory loss. ===[AdBlue Reset] Reset after the diesel exhaust treatment fluid (car urea) is replaced or filled up.====[A/F Reset] Set or learn Air/Fuel ratio parameters.===[Coolant Bleeding] Activate electronic water pump before venting the cooling system.===[Language Change] Change system language originally set in the vehicle central control panel.===[NOx Sensor Reset] Reset the catalytic converter learned value after replacement/repair. ===[Seats Calibration] Calibrate seats equipped with memory function after replacement/repair.===[Stop/Start Reset] Deact.ivate or ac.tivate the automatic start-stop function.===[Transport Mode] Deact.ivate the transport mode so that the vehicle can function normally.===[Tire Reset] Set the size parameters of a tire after it is modified or replaced.===[Windows Calibration] Perform the door & window matching, to restore the ECU initial memory, and restore the automatic ascending & descending function of a power window.

The functions are compatible with 150+ brands, 10,000+ models such as Be.nz, BM.W, Volksw.agen, Aud.i, Skoda, Se.at, Fiat, Renault, Landrover, Jaguar, Volvo, Mitsubishi, Suzuki, and even 2023 newly-launched car models. Say goodbye to carrying multiple scan tools for different brands, and enjoy a hassle-free experience with this all-in-one service solution.
[REMINDER] Available operations vary by the test vehicle. Discover more resets & relearns in specific car software.



Guided Functions (VAG & ManLD)

Are you having trouble finding the correct Security Access Code and Channel Number for Aud.i, Volks-wagen, Skoda, Seat, or ManLD vehicles? Look no further than this Autel scanner’s “Guided Function” to streamline the process. With it, you can easily navigate the steps required for matching, calibration, and basic settings on VAG Group & ManLD vehicles by simply following the provided guidance.

Pre- & Post Scan Report

The “Pre-Scan Report” can identify any potential problems with the vehicle before any repairs are made. This can help to prevent unnecessary repairs and reduce the risk of further damage to the vehicle.
The “Post-Scan Report” can verify that the repairs have been made correctly and that all issues have been resolved. This will back you with evidence if anything wrong happens to the car while repairing.

AutoVIN & Scan VIN/License

For quick vehicle identification, you can use AutoVin / Code Scan (scan VIN barcode or driving license with camera) to read the vehicle identification number for fast access to the diagnostic. Note that this technology doesn't work on all vehicles. You can tap the Manual Input option to input the Vin Number and access the diagnostic menu.



Autel Cloud Report Manament

Save the diagnostic reports to the Autel cloud and share them via QR codes, e-mails, text messages, etc. This way, your customers can view reports on their phones, tablets, and computers at any time and understand the current issues at hand.

Wireless Wi-Fi Printing

You can easily print the diagnostic reports wirelessly from your Autel MaxiPro MP900 via a Wi-Fi printer. You don’t need to make a connection with a computer for printing the diagnostic report.

Expand Features with Tools

Pair with MV105S - have close-up inspection in hard-to-access areas. (sold separately)
Pair with BT506 - get effective vehicle battery system analysis. (sold separately)

Package List:

1 set x Autel MaxiPRO MP900E Scanner