Description
VIDENT iEasy310 Pro is an ultraportable OBDII scanner which can quickly read and erase DTC (engine fault codes). It is a perfect tool for entry-level mechanic enthusiast and DIYers. VIDENT iEasy310 Pro can also be used for plus oxygen monitor test, on-board monitor test, and component test, etc. Its thousands of built-in troubleshooter code tips can help technicians save much time. All in all, iEasy310 Pro is truly the ultimate in cost-effectiveness.
Main Functions of VIDENT iEasy310 Pro:
1. Supports all OBDII functions, turns off check engine light, reset monitor, read enhanced data etc.
2. Give the full name interpretation of data without the difficulty in understanding abbreviations.
3. User-friendly design, one-click read/ clear fault,I/M and read/clear trouble code hot buttons and 2.8'' TFT color screen.
4. Emission test helper, green-yellow-red LEDs and built-in speaker indicate emission monitor status.
5. No battery required, it is charged directly from the OBDII car scanner interface in your vehicle( you just need to turn on the ignition of your vehicle).
6. Supports lifetime free upgrade online via USB cable. Highly recommended as a necessity in your toolbox or gift for Christmas.
7. Supports 11 languages (including English, French, German, Russian, Spanish, Italian, Portuguese, Hungarian, Sweden, Czech, Slovak); You can switch languages directly in the device without downloading language packs.
Highlights of VIDENT iEasy310 Pro:
1. Works with all 12V standard OBDII protocols vehicles.
2. Automatic VIN acquisition and decoding make it easier to read manufacturer specific codes and enhanced mode 6 data.
3. Supports data storage, fault code, system information and other important data storage, playback function. You can also connect your iEasy310 scanner to printer and print out the scan data.
4. Supports waveform display and support maximum 4-channel waveform comparison.
5. Supports 12v standard vehicles battery voltage test.(See if the battery can be used to start a car)
6. Maintenance technicians can select 4 data streams for comparison based on the phenomenon and analyze vehicle problems
7. Data waveform display and comparison of 4 data waveforms for easy observation of digital changes.
8. You can customize boot logo to your taste.
9. Supports all the 10 OBDII test modes below.
Supported Vehicles List
NOTE:
Even though it is compatible with most cars, it may not be compatible with some cars due to its special design or somethings else. Vehicles in different regions support OBD2 protocol at different time. VIDENT iEasy310 Pro is not compatible with those vehicle that do not support OBD2 protocol, such as some Japanese and Korean vehicles.
Please leave us a message in the below format, we will reply to you on working time.
for example : xx, 2005, 2.0cc, Diesel
Warning:
Not Support Russian Cars VAZ, UAZ, LADA; Not works with trucks
Not Support for All Renault vehicles
For Ssangyong Actyon , from 2009 to 2017 years.
For Ssangyong Korando, 2.0 TD Diesel, from 2013 to 2017 years.
For Ssangyong Kyron, 2.0 Diesel, from 2010 to 2017 years.
For Ssangyong Rexton , 2011 to 2017 years,
The Product Comparison Chart
Package Includes:
1pc x Main Unit
1pc x USB cable
1pc x English Manual (for manuals in other languages like German, Spanish and French, please download it from the Internet)
Vident iEasy310Pro CAN OBDII/EOBD Code Reader
VIDENT iEasy310 Pro is an ultraportable OBDII scanner which can quickly read and erase DTC (engine fault codes). It is a perfect tool for entry-level mechanic enthusiast and DIYers. VIDENT iEasy310 Pro can also be used for plus oxygen monitor test, on-board monitor test, and component test, etc. Its thousands of built-in troubleshooter code tips can help technicians save much time. All in all, iEasy310 Pro is truly the ultimate in cost-effectiveness.
Main Functions of VIDENT iEasy310 Pro:
1. Supports all OBDII functions, turns off check engine light, reset monitor, read enhanced data etc.
2. Give the full name interpretation of data without the difficulty in understanding abbreviations.
3. User-friendly design, one-click read/ clear fault,I/M and read/clear trouble code hot buttons and 2.8'' TFT color screen.
4. Emission test helper, green-yellow-red LEDs and built-in speaker indicate emission monitor status.
5. No battery required, it is charged directly from the OBDII car scanner interface in your vehicle( you just need to turn on the ignition of your vehicle).
6. Supports lifetime free upgrade online via USB cable. Highly recommended as a necessity in your toolbox or gift for Christmas.
7. Supports 11 languages (including English, French, German, Russian, Spanish, Italian, Portuguese, Hungarian, Sweden, Czech, Slovak); You can switch languages directly in the device without downloading language packs.
Highlights of VIDENT iEasy310 Pro:
1. Works with all 12V standard OBDII protocols vehicles.
2. Automatic VIN acquisition and decoding make it easier to read manufacturer specific codes and enhanced mode 6 data.
3. Supports data storage, fault code, system information and other important data storage, playback function. You can also connect your iEasy310 scanner to printer and print out the scan data.
4. Supports waveform display and support maximum 4-channel waveform comparison.
5. Supports 12v standard vehicles battery voltage test.(See if the battery can be used to start a car)
6. Maintenance technicians can select 4 data streams for comparison based on the phenomenon and analyze vehicle problems
7. Data waveform display and comparison of 4 data waveforms for easy observation of digital changes.
8. You can customize boot logo to your taste.
9. Supports all the 10 OBDII test modes below.
Read Codes | Component Test | Live Data | Unit of Measure | I/M Readiness |
Erase Codes | On-Board Monitor Test | View Freeze Frame | Vehicle Information | Modules Present |
Supported Vehicles List
American (USA) car | Compatible with 12V Standard OBD2 Cars from 2001 to Now: | for Chrysler, for Ford, for GM, for Jeep, for GMC, for BUICK, for Saturn, for Pontaic, for Chery |
European car | Compatible with 12V Standard OBD2 Cars from 2004 to Now: | for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for Fiat, for VW, for Ford, for Jaguar |
French Car | Compatible with 12V Standard OBD2 Cars from 2006 to Now: | for Peugeot, for Citroen, Not Support for All Renault vehicles as: Not Support for Renault Clio 2/Megane/Dacia Logan / .etc |
Japanese car | Compatible with 12V Standard OBD2 Cars from 2007 to Now: | for KIA, for Isuzu, for Honda, for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota |
Chinese car: | Compatible with 12V Standard OBD2 Cars from 2011 to Now: | for BYD, for Chery, for Geely, for Great Wall, for Karry, for JAC |
NOTE:
Even though it is compatible with most cars, it may not be compatible with some cars due to its special design or somethings else. Vehicles in different regions support OBD2 protocol at different time. VIDENT iEasy310 Pro is not compatible with those vehicle that do not support OBD2 protocol, such as some Japanese and Korean vehicles.
Please leave us a message in the below format, we will reply to you on working time.
for example : xx, 2005, 2.0cc, Diesel
Warning:
Not Support Russian Cars VAZ, UAZ, LADA; Not works with trucks
Not Support for All Renault vehicles
For Ssangyong Actyon , from 2009 to 2017 years.
For Ssangyong Korando, 2.0 TD Diesel, from 2013 to 2017 years.
For Ssangyong Kyron, 2.0 Diesel, from 2010 to 2017 years.
For Ssangyong Rexton , 2011 to 2017 years,
The Product Comparison Chart
Model | Creator C302 | VIDENT iEasy310 Pro | Foxwell NT301 | Launch CReader 3001 |
Vehicle coverage | All 1996 and newer cars, light-duty trucks, SUVs and minivans worldwide | All 1996 and newer cars, light-duty trucks, SUVs and minivans worldwide | All 1996 and newer cars, light-duty trucks, SUVs and minivans worldwide | All 1996 and newer cars, light-duty trucks, SUVs and minivans worldwide |
Work on almost all electronic systems | engine | engine | engine | Engine |
OBDI and OBDII compatiblity | OBDII /EOBD | OBDII /EOBD | OBDII /EOBD | OBDII /EOBD |
Read and clear codes | √ | √ | √ | √ |
Read/record/graph live sensor data | √ Single data display | √ Comparison of single-data waveform graph and four-data waveform graph | √ Comparison of single-data waveform graph and four-data waveform graph | √ Single data display |
Freeze frame data | OBDII only | OBDII only | OBDII only | OBDII only |
ECU information | √ | √ | √ | √ |
Battery test | Test and display battery voltage and battery temperature. | Test and display battery voltage. | X | X |
I/M hot button | X | √ | √ | X |
Multilingual menu and codes | √ | √ | √ | √ |
Color screen | 2.4' FTF color screen | 2.8' FTF color screen | 2.8' FTF color screen | 1.77" TFT color screen |
Update | Life-long free update | Life-long free update | Life-long free update | Life-long free update |
Available Languages | Engilsh, Deutsch, Spanisch, Simplified Chinese,traditional Chinese, Dutch etc, Russian | English,French,German, Russian,Spanish,Italian,Portuguese, Hungarian,Sweden, Czech, Slovak | English, French, German, Italian, Polish, Portuguese, Russian, Japanese, Korean, Chinese and Spanish | English, French, Russian, Spanish, German, Italian, Portuguese |
Package Includes:
1pc x Main Unit
1pc x USB cable
1pc x English Manual (for manuals in other languages like German, Spanish and French, please download it from the Internet)
Recommend Items
- US$475.00
- US$49.00
- US$29.99
- US$289.00
- US$370.00
- US$41.90
- US$89.00
- US$370.00
- US$990.00
- US$9.90
- US$19.90
- US$198.00
Special Items
- US$19.90
- US$47.49
- US$129.00
- US$40.84
- US$249.00
- US$18.90
- US$340.00
- US$35.90
- US$329.00
- US$509.00
- US$65.90
- US$24.90